Cold Press Juicer 400W, 50 RPM, 5.3 in Feed, Reverse, Lid Interlock

Whole Produce, Fewer Prep Steps

This juicer pairs a 5.3" wide feed with a knife-free chute so that many apples and larger vegetables can load without pre-cutting. A 400W drive turns at 50 RPM to limit heat rise during extraction and preserve flavor. Multi-stage pressing channels separate juice and pulp for steady output. When the lid opens, the motor stops to prevent running while you adjust bins or the chute. The compact body fits on most counters without crowding nearby tools. A clear bowl and outlet let you see the yield and switch containers without pausing.

Smart Features for Daily Use

A single toggle selects forward press or reverse to clear fibrous stalls. The feed tank geometry guides produce toward the auger to reduce prodding and keep flow moving. An indexed handle aligns with the start area for correct assembly and start-up. Clear markings on the lid and bowl help with reassembly after washing. Touch points are positioned for loading and discharging without shifting the base. A lid-status indicator confirms alignment before the drive engages.

Clean Up and Storage

The one-piece cold-press set breaks into three main parts for rinsing and hand washing. A dedicated brush sweeps screens and channels before reassembly. The bowl, lid, and chute nest inside the main body for storage between uses. Keep the inlet and outlet dry after cleaning to maintain fit and flow. Reassembly uses keyed tabs so each part seats in a single orientation.

Product Benefits:

• 5.3" wide feed: accepts many whole fruits to cut prep time
• 50 RPM drive: slow turn rate helps manage heat during pressing
• Reverse mode: clears fibrous stalls mid-run
• Lid-open interlock: motor pauses when the lid is opened
• Three-part assembly: fast breakdown with included brush

Specifications:

• Color Variants: Gray (13.66" D × 7.59" W × 17.24" H), Deep Gray (13.4" D × 17" W × 7.49" H), Stainless Steel (17" D × 12.5" W × 7.5" H)
• Motor Power: 400 W
• Speed: 50 RPM slow cold-press
• Feed Opening: 5.3" diameter
• Operation: Forward press; reverse for anti-block
• Interlock: Lid-open motor stop
• Design: Knife-free loading; multi-stage extrusion path
• Disassembly: Three primary parts; cleaning brush included
• Controls: Touch
• Care: Hand wash only